• Nitecore Q2 Intellicharger Battery Charger
Move pointer over the image to zoom in

Nitecore Q2 Intellicharger Battery Charger

Nitecore Q2 Battery Charger

Product Features:

Nitecore Q2 Charger

Nitecore Q2 charger is an essential addition to any vaper’s arsenal. Equipped with two bays, each bay is independently monitored and charged, offering complete safety and assurance. The Q2 is capable of charging a single battery up to 2A, and two batteries at 1A each. Constructed out of flame retardant and fire resistant PC materials, the Q2 has been designed with safety in mind. Equipped with an LED light above each bay, the Q2 gives users insight into the charge of their batteries at a quick glance. A red LED means charging is in progress, and green means your and your batteries are good to go. The intelligent internals of the Q2 automatically detect the battery status and applies the optimal charging mode for the battery so you don’t have to.

Dual Bay Battery Charger
Dimensions: 125.4*59.6*36.2mm
Input: DC 12V 1000mAh 12W
Output: 4.2V ± 1% 1A×2, 2A×1
Independent Battery Charging & Monitoring
Two Charging Modes: Constant Current, Constant Voltage
Automatic Battery Detection
Automatic Optimal Charging Mode Selection
Optimized IMR Charging system
LED Battery Life Indicator
Flame Retardant Construction
Reverse Polarity Protection
Short Circuit Protection
Overcharge Protection
Certifications: RoHS, CE, FCC, & CEC.

Package Contents:
1 x Q2 Charger
1 x US Power Cord
1 x User Manual
1 x Warranty Card.

Charging Batteries Disclaimer

Vapecity509.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VapeCity509 is not responsible for any damage for any reason.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. 
  • Model: Nitecore Q2
  • Manufacturer:Nitecore

Write Review

Note: Do not use HTML in the text.